Want to book by phone? Call usTel: +86-531-88698938Email: cable@sdxlxdl.com  
Products Categories
Contact Us

Shandong New Luxing Cable Co.,Ltd
Add:Room D901, Binhe Business Center,Tianqiao District, Jinan City, Shandong Province, China

New Products

0.6/1kV Unarmouered Low Voltage Cable to IEC60502 Standard CU/XLPE/PVC Cable

google facebook


Home > News > Content

Reasons Why Silicone Rubber Cables Tend To Bubble When Produced

Shandong New Luxing Cable Co.,Ltd | Updated: Nov 21, 2018

Reasons why silicone rubber cables tend to bubble when produced
Silicone rubber cables are very common when they are produced, because the production process of silica rubber cables is more complex and it is easier to bubble than ordinary acorn cables. It is mainly caused by the following reasons:
1, glue material itself problem glue content is high, water volatilization in vulcanization causes foaming.
2, the cable core is damp, causing bubbles when heated.
3, vulcanization temperature caused by too high.
In order to avoid bubbling, we should consider the above aspects to eliminate this kind of problem. The specific operational methods are:
1, in the Silicon rubber rubber rubber mixture when the first choice of low moisture content of the meta rubber material, the filling material should be selected dry, can not choose the filling material has absorbed moisture.
2, to pay attention to the drying of the cable core, the cable is not allowed to use hygroscopic materials to fill the cable core, and should be careful not to let the cable core damp, especially in the southern region in Meiyujijie is prone to this problem.
3, vulcanization temperature can not be high, high will be a few decomposition of vulcanization.
These are the reasons for the Silicon rubber cable bubbles, which need to be highly valued by the production department to reduce or not appear.

Home | About Us | Product | News | Knowledge | Contact Us | Mobile | XML

Copyright © Shandong New Luxing Cable Co.,Ltd All rights reserved.

Shandong New Luxing Cable Co.,Ltd